10月14日—16日,2026湾区半导体产业生态博览会(湾芯展)于深圳会展中心(福田)举办。曼恩斯特携玻璃基板关键薄膜工艺解决方案及核心装备亮相7H08展位,重点展示磁控溅射设备(PVD)、原子层沉积设备(ALD)及精密狭缝涂布设备(Slot-die Coater)在玻璃基板先进封装领域的应用能力。
AI算力与高性能计算需求持续增长,先进封装正向更大尺寸、更高互连密度演进。玻璃基板凭借优异的尺寸稳定性、电绝缘性与可调介电常数,受到广泛关注。TGV(玻璃通孔)是实现玻璃基板上下表面电气互连、支撑高密度垂直互连的关键结构。
但玻璃基板先进封装的产业化仍面临高深宽比TGV通孔金属化、膜层沉积均匀性与连续性控制,以及大面积RDL介电层的制备等核心工艺挑战。曼恩斯特以PVD、ALD、狭缝涂布三大技术平台,覆盖通孔金属化均匀沉积与RDL介电层制备等关键工艺,为玻璃基板先进封装提供核心装备支持。
01
TGV核心技术
金属化与互连可靠性
玻璃基板经激光改质、湿法刻蚀形成通孔后,通常需先沉积金属附着层与铜种子层,再通过铜电镀填充形成垂直导电通路。种子层连续性与界面附着性能,是影响电镀质量及长期互连可靠性的关键。
随着通孔孔径缩小、深宽比提升,PVD方向性沉积受遮蔽效应制约,孔内侧壁覆盖不足、局部种子层不连续,易引发电镀空洞与填充不均。同时,玻璃与金属热膨胀系数失配及薄膜残余应力,进一步影响界面稳定性。
展会现场,曼恩斯特自主研发的连续磁控溅射(PVD)设备与原子层沉积(ALD)设备吸引了众多技术人员与企业代表关注。围绕不同孔径与深宽比TGV通孔的薄膜沉积需求,两类设备形成工艺互补:PVD侧重高效金属沉积,ALD侧重高深宽比结构的保形覆盖。
连续磁控溅射(PVD)
高效沉积金属附着层与种子层
设备采用全自动进出片设计,减少间歇式设备的批次等待时间,有效提升设备产出效率。并支持生产节拍按需定制,提供覆盖实验、中试及规模化量产不同阶段的设备配置。
设备搭载HiPIMS高功率脉冲磁控溅射技术,通过优化等离子体特性,提升金属薄膜致密度与界面附着力。针对玻璃基板的热负荷敏感特性,采用低温沉积与低损伤工艺设计,有效抑制超薄玻璃基板翘曲,确保镀层均匀致密。设备面向深宽比 ≤ 12:1 的通孔金属化需求,适配玻璃、陶瓷及硅基等多种基板。
通过模块化腔体设计,支持单面或双面镀膜靶位定制,兼顾工艺配置灵活性与维护便利性。结合连续化生产模式减少批次切换损耗,帮助客户优化单位产出成本。
ALD原子层沉积
高深宽比结构的薄膜沉积
ALD设备基于自限制性表面反应,实现原子级膜厚控制,兼具优异的薄膜均匀性与工艺重复性,彻底消除结构遮蔽效应。适用高深宽比通孔内阻挡层、界面层及导电成核层等功能薄膜的精细制备。
设备支持深宽比15:1~150:1、孔径20μm以下的高深宽比通孔应用,在适宜工艺条件下台阶覆盖率近100%,为复杂三维结构的功能薄膜制备提供技术支撑。
同时温和的制程温度适配多种热敏性基材,在保证成膜质量的同时降低热负荷,避免玻璃基板热变形与性能退化风险。
从常规深宽比的高效金属化到超高深宽比的保形沉积,PVD与ALD形成梯度覆盖,为不同TGV结构提供差异化技术选择。
02
RDL介电层
狭缝涂布提升大面积成膜均匀性
随着玻璃基板先进封装向大尺寸、面板级制造发展,传统旋涂工艺在材料利用率与膜厚均匀性上面临挑战。曼恩斯特平板狭缝涂布设备,采用线性涂布方式,无旋转机械应力,支持单面、双面工艺切换,为大面积光敏PI/PBO介电材料及光刻胶涂布提供高均匀、低损耗的涂布技术支撑。
高精度成膜,保障介电层均匀性
设备搭载自研高精度涂布模头与闭环供液系统,实现有效涂布区域膜厚均匀性≤3%,材料利用率>95%,为精细线路所需的介电层均匀制备提供关键工艺基础。
稳定供液与洁净控制,降低涂层缺陷风险
高精度注液泵流量分辨率达0.01μL/s,配合模头预挤出、自动清洗及整机FFU洁净系统,有效提升涂布过程的供液稳定性与洁净控制水平,降低残液及颗粒污染造成的涂层缺陷风险。
多材料适配,支撑规模化制造
设备兼容多种规格硼硅玻璃基板与半导体介电材料,支持小批量研发至面板级量产机型选型,为L/S 2~5μm级RDL精细布线提供介电层制备工艺支持。
本届湾芯展期间,围绕相关工艺难点、技术进展及产业化挑战等话题,曼恩斯特与到场行业同仁展开深入意见交流。
面向未来,针对AI算力、CPO光互联及2.5D/3D先进封装等领域蓬勃发展的技术需求,曼恩斯特将持续推进核心工艺与装备创新,深化应用探索,为玻璃基板先进封装技术发展及应用拓展提供解决方案支持。
展会预告
2026印度国际电池储能博览会
Booth:7.185
Time:10月22日-24日
Greater Noida, India
Held from October 14 to 16 at the Shenzhen Convention and Exhibition Center (Futian), the WESEMiBAY Semiconductor Ecosystem Expo 2026 brought MANST to Booth 7H08, where the company showcased its glass substrate thin-film process solutions and core equipment, including magnetron sputtering (PVD), atomic layer deposition (ALD), and precision slot-die coating systems.
As demand for AI computing power and high-performance computing continues to grow, advanced packaging is evolving toward larger sizes and higher interconnect densities. Glass substrates have attracted widespread attention due to their excellent dimensional stability, electrical insulation properties, and tunable dielectric constant. TGV (Through Glass Via) is a key structure for achieving electrical interconnection between the upper and lower surfaces of glass substrates and supporting high-density vertical interconnects.
However, the industrialization of glass substrate advanced packaging still faces core process challenges such as metallization of high-aspect-ratio TGV vias, control of film deposition uniformity and continuity, and fabrication of large-area RDL dielectric layers. With three major technology platforms—PVD, ALD, and slot-die coating—MANST covers key processes including uniform deposition for via metallization and RDL dielectric layer fabrication, providing core equipment support for glass substrate advanced packaging.
01 TGV Core Technology: Metallization and Interconnect Reliability
After glass substrates undergo laser modification and wet etching to form vias, a metal adhesion layer and a copper seed layer typically need to be deposited first, followed by copper electroplating filling to form vertical conductive pathways. The continuity of the seed layer and interfacial adhesion performance are key factors affecting electroplating quality and long-term interconnect reliability.
As via diameters shrink and aspect ratios increase, PVD directional deposition is constrained by shadowing effects, resulting in insufficient via sidewall coverage and localized seed layer discontinuity, which can easily lead to electroplating voids and non-uniform filling. Meanwhile, the mismatch in thermal expansion coefficients between glass and metal, as well as residual stress in thin films, further affects interfacial stability.
At the exhibition site, MANST's independently developed continuous magnetron sputtering (PVD) equipment and atomic layer deposition (ALD) equipment attracted attention from numerous technical personnel and corporate representatives. Addressing thin film deposition requirements for TGV vias with different diameters and aspect ratios, the two types of equipment form process complementarity: PVD focuses on high-efficiency metal deposition, while ALD focuses on conformal coverage of high-aspect-ratio structures.
Continuous Magnetron Sputtering (PVD): High-Efficiency Deposition of Metal Adhesion Layers and Seed Layers
The equipment adopts a fully automated substrate loading/unloading design, reducing batch waiting time associated with batch-type equipment and effectively improving equipment throughput. It also supports customizable production takt time, providing equipment configurations covering different stages from laboratory and pilot-scale to large-scale mass production.
The equipment is equipped with HiPIMS high-power impulse magnetron sputtering technology, which enhances metal thin film density and interfacial adhesion by optimizing plasma characteristics. Targeting the thermal load sensitivity of glass substrates, it adopts low-temperature deposition and low-damage process design, effectively suppressing warpage of ultra-thin glass substrates and ensuring uniform and dense coatings. The equipment addresses via metallization requirements with aspect ratios ≤ 12:1 and is compatible with various substrates including glass, ceramics, and silicon-based materials.
Through modular chamber design, it supports customization of single-sided or double-sided coating target positions, balancing process configuration flexibility and maintenance convenience. Combined with a continuous production mode to reduce batch switching losses, it helps customers optimize unit output costs.
ALD Atomic Layer Deposition: Thin Film Deposition for High-Aspect-Ratio Structures
The ALD equipment is based on self-limiting surface reactions, achieving atomic-level film thickness control, with excellent film uniformity and process repeatability, thoroughly eliminating structural shadowing effects. It is suitable for fine preparation of functional thin films such as barrier layers, interface layers, and conductive nucleation layers in high-aspect-ratio vias.
The equipment supports high-aspect-ratio via applications with aspect ratios of 15:1–150:1 and via diameters below 20 μm. Under suitable process conditions, step coverage is nearly 100%, providing technical support for functional thin film preparation of complex three-dimensional structures.
Meanwhile, the mild process temperature is compatible with a variety of heat-sensitive substrates, reducing thermal load while ensuring film formation quality, and helping to reduce the risk of thermal deformation and performance degradation in glass substrates.
From high-efficiency metallization at conventional aspect ratios to conformal deposition at ultra-high aspect ratios, PVD and ALD form gradient coverage, providing differentiated technical options for different TGV structures.
02 RDL Dielectric Layers: Slot-Die Coating Enhances Large-Area Film Uniformity
As glass substrate advanced packaging develops toward large sizes and panel-level manufacturing, traditional spin-coating processes face challenges in material utilization and film thickness uniformity. MANST's flat-panel slot-die coating equipment adopts a linear coating method without rotational mechanical stress, supports single-sided and double-sided process switching, and provides high-uniformity, low-loss coating technology support for large-area photosensitive PI/PBO dielectric materials and photoresist coating.
High-Precision Film Formation Ensures Dielectric Layer Uniformity
The equipment is equipped with a self-developed high-precision coating die and closed-loop liquid supply system, achieving film thickness uniformity ≤ 3% in the effective coating area and material utilization > 95%, providing a critical process foundation for uniform preparation of dielectric layers required for fine circuitry.
Stable Liquid Supply and Cleanliness Control Reduce Coating Defect Risk
The high-precision injection pump achieves a flow rate resolution of 0.01 μL/s. Combined with die pre-extrusion, automatic cleaning, and a whole-machine FFU cleanliness system, it effectively improves liquid supply stability and cleanliness control during coating, reducing the risk of coating defects caused by residual liquid and particle contamination.
Multi-Material Compatibility Supports Scalable Manufacturing
The equipment is compatible with borosilicate glass substrates of various specifications and semiconductor dielectric materials, supporting model selection from small-batch R&D to panel-level mass production, and providing dielectric layer preparation process support for L/S 2–5 μm RDL fine-line patterning.
During WESEMiBAY 2026, MANST held in-depth discussions with industry peers on process challenges, technological developments, and the commercialization of glass-substrate advanced packaging.
Looking ahead, as demand grows in areas such as AI computing, CPO optical interconnects, and 2.5D/3D advanced packaging, MANST will continue to advance core process and equipment technologies and explore new applications, supporting the further development and adoption of glass-substrate advanced packaging.
编辑 | 阿聪
审核 | 小熊
终审 | 魏小姐
往 期 推 荐
股票
板块
用户
资讯
评论 (0)