股票
板块
用户
资讯
首页
天眼
自选
发现
开户
首页
天眼
自选
发现
我的

汽车前沿技术 | Allegro MicroSystems推出 48V 电源及精密传感解决方案

据报道,运动控制和节能系统电源及传感解决方案供应商 Allegro MicroSystems,推出完整的运动控制与传感产品组合,助力汽车架构从 12V 向 48V 平稳过渡,以支持下一代高级驾驶辅助系统(ADAS)。其扩展后的 ADAS 产品系列包括 AMD89106 和 AMD89186 栅极驱动器、高精度 A17810 感应式扭矩传感器,以及业界首款单芯片“真 48V”电源管理集成电路(PMIC)——A81481。这些器件共同构建了一套统一的电源与传感信号链,服务于转向和制动等安全关键型系统;这些系统构成了现代 ADAS 设计的执行核心,能够将驾驶决策转化为车辆的精确响应。

主要产品亮点:

AMD89106 / AMD89186 栅极驱动器:凭借引脚布局(footprint)和寄存器兼容的架构,在 12V 和 48V 平台之间实现“一次设计,多平台通用”的扩展能力,从而避免了重新设计电路板,并保护了客户在嵌入式软件方面的既有投入。

A17810 感应式扭矩传感器:通过高精度、高可靠性的转向扭矩测量功能简化机械设计,且无需磁铁及复杂的屏蔽措施。

A81481 单芯片 48V 电源管理集成电路(PMIC):助力汽车制造商构建更紧凑、更高效且符合安全要求的 48V 电源架构,并将物料清单(BOM)成本最高降低 50%。

“随着汽车制造商向 48V 区域化架构转型,工程团队已无法再为 12V 和 48V 平台分别进行独立设计。”Allegro 全球市场与应用副总裁 Ram Sathappan 表示:“我们尺寸兼容的栅极驱动器、无需磁铁的扭矩传感技术,以及单芯片 48V 电源管理集成电路(PMIC),共同构成了安全关键型转向和制动系统所需的电源与传感解决方案。汽车制造商现在可以实现从 12V 到 48V 底盘平台的无缝扩展,复用现有软件,并显著缩小电子控制单元(ECU)的尺寸,同时降低物料清单(BOM)成本。”

新型栅极驱动器助力简化“软件定义汽车”(SDV)的落地应用

随着汽车行业向“软件定义汽车”(SDV)转型,汽车制造商在同时管理 12V 和 48V 电机平台时,面临着巨大的工程负担。为解决这种架构碎片化问题,AMD89106(12V)和 AMD89186(48V)三相无刷直流(BLDC)电机栅极驱动器采用了相同的 PCB 布局(封装)和寄存器映射。这种兼容性使得工程师能够设计统一的电机控制板,并在车辆向更高电压架构迁移时,复用关键的软件代码库。这两款器件均集成了同相电流检测和数字电流回读功能;与传统的低侧(low-side)电流检测拓扑相比,它们显著提升了线控转向、机电制动(EMB)、主动悬架以及低压车载充电系统中的电机电流检测精度。

无磁式扭矩传感器:提升精度并降低转向系统复杂性

Allegro 推出的全新 A17810 感应式双角度传感器符合 AEC-Q100 Grade 0 标准。该传感器无需传统磁式扭矩传感器所必需的磁体、磁通集中器及屏蔽装置,因此能够免受周边电气系统所产生的杂散磁场干扰。A17810 通过测量两个导电目标物,可在芯片内部计算出扭矩及绝对游标角度,从而减少了元件数量并降低了机械复杂性。这种双角度检测功能不仅能满足电动助力转向 (EPS) 和线控转向系统所需的高精度要求,还有望省去传统转向柱中所需的行星齿轮组及独立的角度传感器。

单芯片电源管理集成电路(PMIC)构建一体化 48V 电源主干

作为电源信号链中的关键一环,全新的 A81481 PMIC 为各类安全关键型 48V 电子控制单元(ECU)提供了专用电源基础,应用领域涵盖电动助力转向(EPS)、线控系统(X-by-wire)、电子机械制动(EMB)、主动悬架、车载充电以及 DC-DC 转换等。传统的 48V 架构通常采用多芯片方案,即由一个专用 12V PMIC 搭配独立的 48V 预稳压器及各类分立式保护电路组成;而 A81481 则将双路降压稳压器、五路低压差稳压器(LDO)以及符合 ASIL D 等级的安全诊断功能集成于单一器件之中。这种方案为安全关键型 48V ECU 供电提供了更直接的途径,在降低设计复杂度的同时,还能将物料清单(BOM)成本最高削减 50%。

Allegro MicroSystems, Inc. (“Allegro”) (Nasdaq: ALGM), a global leader in power and sensing solutions for motion control and energy-efficient systems, is simplifying the transition from 12V to 48V automotive architectures with a complete motion control and sensing portfolio for next-generation advanced driver assistance systems (ADAS). The expanded ADAS offering includes the AMD89106 and AMD89186 gate drivers, the highly accurate A17810 inductive torque sensor, and the industry’s first single-chip true 48V power management IC (PMIC), the A81481. Together, these devices deliver a unified power and sensing signal chain for safety-critical steering and braking systems – the actuation backbone of modern ADAS design that translates driving decisions into precise vehicle response.

Key Portfolio Highlights:

AMD89106 / AMD89186 Gate Drivers: Deliver design-once scalability across 12V and 48V platforms through footprint- and register-compatible architectures, eliminating board re-spins and preserving embedded software investments.

A17810 Inductive Torque Sensor: Simplifies mechanical design by measuring steering torque with high accuracy and reliability, eliminating the need for magnets and complex shielding.

A81481 Single-Chip 48V PMIC: Enables automakers to build smaller, more efficient, safety-ready 48V power architectures with up to 50% lower bill-of-materials (BOM) costs.

“As automakers transition to 48V zonal architectures, engineering teams cannot afford to maintain separate designs for 12V and 48V platforms,” said Ram Sathappan, Vice President of Global Marketing and Applications at Allegro. “Our footprint-compatible gate drivers, magnet-free torque sensing and the single-chip 48V PMIC bring together the power and sensing solution needed for safety-critical steering and braking systems. Automakers can now scale seamlessly from 12V to 48V chassis platforms, reuse existing software and significantly reduce electronic control unit size and BOM costs.”

New Gate Drivers Simplify Software-Defined Vehicle (SDV) Adoption

As the industry shifts toward software-defined vehicles (SDVs), automakers face significant engineering overhead when managing parallel 12V and 48V motor platforms. To resolve this architectural fragmentation, the AMD89106 (12V) and AMD89186 (48V) three-phase brushless DC (BLDC) gate drivers share identical PCB footprints and register maps. This compatibility allows engineers to lay out a single motor control board and reuse critical software codebases as vehicles migrate to higher voltages. Both devices integrate in-phase current sensing and digital current readback, improving motor current accuracy in steer-by-wire, electromechanical braking (EMB), active suspension and low-voltage onboard charging systems compared to conventional low-side sensing topologies.

Magnet-Free Torque Sensor Improves Accuracy and Reduces Steering Complexity

Allegro’s new A17810 inductive dual-angle sensor is AEC-Q100 Grade 0 qualified and eliminates the magnets, flux concentrators and shielding required by conventional magnetic torque sensors, making it immune to stray magnetic fields caused by nearby electrified systems. By measuring two conductive targets to calculate torque and absolute Vernier angle on-chip, the A17810 reduces component count and mechanical complexity. This dual-angle capability delivers the high accuracy needed for electric power steering (EPS) and steer-by-wire systems while potentially eliminating a satellite gear and separate angle sensors required in conventional steering columns.

Single-Chip PMIC Delivers Integrated 48V Power Backbone

Completing the power signal chain, the new A81481 PMIC provides a dedicated power foundation for safety-critical 48V electronic control units (ECUs) across EPS, X-by-wire, EMB, active suspension, onboard charging and DC-DC applications. While traditional 48V architectures rely on a multi-chip approach, pairing a dedicated 12V PMIC with a separate 48V pre-regulator and supporting discrete protection circuits, the A81481 integrates dual buck regulators, five low-dropout (LDO) regulators, and ASIL D safety diagnostics into a single device. This provides a more direct path to powering safety-critical 48V ECUs while reducing design complexity and lowering BOM costs up to 50%.

作者:Allegro MicroSystems

来源:https://www.allegromicro.com

原文链接
多空观点 观点仅供交流,不构成投资建议
点赞
踩一踩
收藏
分享

评论 (0)

0/200
声明:社区内容仅代表用户个人观点,不构成任何投资建议。投资有风险,入市需谨慎。