股票
板块
用户
资讯
首页
天眼
自选
发现
开户
首页
天眼
自选
发现
我的

子母门封边机 KE-398DU丨专为子母门、隐形门打造,实现精准高效封边

KDT极东机械「子母门封边机KE-398DU」为子母门、隐形门等台阶口封边工艺打造,集直边与子母门成型多工序加工于一体。实现精准成型、稳固压贴与精细修边,让封边效果更平整、更美观,满足高品质木门的多样化加工需求。

KDT [L-shaped Edge Banding Machine KE-398DU] is designed primarily for L-shaped edges of unequal double doors and invisible doors and enables one-touch switching between straight and L-shaped edges. It integrates multiple processes, including profiling, pressing, and fine trimming, to deliver smooth and aesthetically pleasing edges, making it an all-in-one edge banding solution for premium doors.

HIGHLIGHTS

核心亮点

PC智能控制系统

PC-based control system

PC智能控制系统,可视化编辑。

PC-based control system, with a touchscreen for intuitive editing.

双排流利条

Double-row roller conveyor

流利条支架提供多点支撑作用,保证封边过程中运行平稳。

Double roller tracks ensure stable panel conveying during edge banding.

自动压梁定位

Pressure beam positioning system

封边最大板材厚度80mm,可根据板材厚度自动调节压梁高度。

Automatically adjust the pressure beam height to match varying panel thicknesses up to 80mm.

GLUING PROCESS

涂胶工艺

预铣机构

Pre-milling unit

采用双铣刀对直板开料产生的波纹痕迹、毛刺或不垂直等现象进行修饰,使封边条与板材的贴合更加紧密,整体性和美观度更佳。

Dual milling cutters eliminate waviness, burrs, and uneven surfaces to deliver smooth edges for tight tape bonding.

子母门伺服锯铣、精铣

Servo sawing & fine milling units for L-shaped edges

联动伺服成型锯切完成台阶铣形,精铣加工表面平整细腻。

The servo sawing unit creates the L-shaped profile, while the fine milling unit ensures a smooth surface.

烤灯装置

Pre-heating unit

热板件,提升板材与边带的粘合效果。

Pre-heat the panel to improve adhesion with the tape.

涂胶压贴机构

Gluing and pressing unit

直边均匀涂胶,采用PUR胶锅,可快速切换不同颜色胶水,PUR胶量带刻度可视化精准调节,六轮压贴机构、压贴封边带平整高效;压贴轮配有刮胶刀,自动清理压轮。

The PUR glue pot for straight edges supports quick glue color changes, with scale markings for precise adjustment of glue application. The 6-roller pressing unit flexibly presses the tape against the straight edge, with scrapers that automatically remove glue residue from the rollers.

子母门PUR上熔胶机构

Upper PUR glue pot for L-shaped edges

子母门模式采用PUR上胶锅,可快速切换不同颜色胶水,子母压贴机构、压贴封边带平整高效;压贴轮配有刮胶刀,自动清理压轮。
The top-mounted PUR glue pot for L-shaped edges supports quick glue color changes. The pressing unit flexibly presses the tape against the L-shaped edge, with scrapers that automatically remove glue residue from the rollers.

EFFICIENT

高效生产

齐头机构

End cutting

通过精密的直线导轨运动,快速切断板材前后多余边带,确保切断面平整光滑。

Two cutters travel along a precision linear guide rail to quickly cut the tape at both ends of the panel and produce clean cuts.

气动精修

Pneumatic fine trimming

子母门和直边双工位一键气动修边,将封边带上下两边突出于木板上下表面多余的封边带切除,使封边带上下边缘与木板的上下表面平齐。

This unit pneumatically switches between straight and L-shaped edges via one touch. It trims excess tape extending above and below the panel for a flush finish.

气动柔性平刮边机构

Pneumatic flexible flat scraping unit

一键切换子母门和直边,柔性靠模紧密贴合板材,封边更完美。

It switches between straight and L-shaped edges via one touch, with a floating tracing unit closely tracking the edge contour for precise scraping.

CLEANING PROCESS

洁净工艺

双往复式抛光

Double reciprocating buffing

清除板件上下面的余胶和碎屑。

Removes residual glue and chips from top & bottom surfaces of the panel.

脱模、清洁机构

Release agent unit & Cleaning unit

可在待封边的板件上下面喷一层脱模剂,有效防止封边过程中溢出的热熔胶粘染板面。

Spraying release agent on top & bottom surfaces of the panel can prevent hot-melt glue from contaminating it during edge banding.

板材上下表面喷涂清洁剂,配合抛光机构清洁板材上下面的余胶和碎屑。

Spraying cleaning agent on top & bottom surfaces of the panel helps the buffing unit remove residual glue and chips.

视频鉴赏Video analysis

技术参数Technical parameters

END

原文链接
多空观点 观点仅供交流,不构成投资建议
点赞
踩一踩
收藏
分享

评论 (0)

0/200
声明:社区内容仅代表用户个人观点,不构成任何投资建议。投资有风险,入市需谨慎。