Wi-Fi & Bluetooth FGM842D series | Quectel
Wi-Fi & Bluetooth FGM842D series - Wi-Fi 4 single-band and BLE 5.2 module - LGA form factor - FGM842D: 12.5 mm × 13.2 mm × 1.8 mm - FGM842D-P: 16.6 mm × 13.2 mm × 1.8 mm - FGM842D: 1.05 g - FGM842D-P: 1.14 g - Operating temperature range: -40℃ to +105℃ - Storage temperature range: -45℃ to +115℃ Have a question? Contact us Key features - Wi-Fi 4 module, single band (2.4GHz) Wi-Fi, 1 × 1 antenna - Bluetooth Low Energy (BLE 5.2) - Built-in 288 KB RAM and 2 MB flash or 4 MB flash - Supports IEEE 802.11b/g/n - Supports up to 19 GPIOs for SPI, I2C, ADC and PWM interfaces in QuecOpen® solution - RF coaxial connector (IPEX Gen 4), pin antenna interface, PCBantenna (optional) - Wide operating temperature range Overview FGM842D is a series of the cutting-edge MCU Wi-Fi and Bluetooth Combo module launched by Quectel. It boasts a high-performance processor (ARM968) with a frequency of up to 160 MHz and supports IEEE 802.11b/ g/ n protocol and BLE 5.2. The module features built-in 288 KB RAM and 2 MB flash or 4 MB flash. The module is in an LGA form factor with an ultra-compact package size, which optimizes the size and cost for end-products and is compatible with diverse designs. The module complies with WPA-PSK, WPA2-PSK and WPA3-SAE security standards, supports TRNG (True Random Number Generator) and AES-128 encryption algorithm, and supports secure firmware and flash encryption. The module supports UART and GPIO interfaces by default and supports SPI, I2C, ADC and PWM functions in QuecOpen® solution and many low power consumption modes and keep-alive mechanisms, which provide flexibility and versatility for a range of applications, especially in smart homes and industrial IoT scenarios. The module supports QuecOpen® solution and standard AT commands, with a compact protocol, and can realize efficient product development for customers.
评论 (0)